| 1. |
Upper Leather and Leather Materials
a) Introduction of physical testing of leather, leather products, Components
b) Thickness measurement and Tensile strength and elongation at break
c) Resistance to water penetration
d) Flexing resistance of leather and coated materials
e) Colour fastness to circular rubbing
|
| 2. |
Upper Leather and Leather Materials
a) Water Spotting
b) Water vapour permeability (WVP), water vapour absorption, (WVA) and water vapour coefficient
c) Coating adhesion strength
d) Apparent density of sole leather
e) Hot contact and break pipeness test
|
| 3. |
Soling material
a) Hardness of sole materials
b) Sample preparation for Abrasion resistance –Synthetic soling
c) Effective Thickness of sole wearing surface
d) Flexing endurance –With pattern sole
e) Sample preparation for slip resistance test
|
| 4. |
Components
a) Sample preparation for peel strength and Colour Fastness to water of Tough & close Material, Breaking load and Extension at break for thread.
b) Fatigue resistance of slide fasteners, burst strength for slide fasteners, fatigue resistance of shanks material, Needle pull out test for elastic tape,
c) Limit of useful extension of elastic material, After heat ageing test for elastic material, Corrosion resistance for metallic eyelets, trims and buckles.
|
| 5. |
Full shoe
a) Sole bond adhesion strength for sole and upper material
b) Toe load for full shoe
c) Water penetration test for full shoe
d) Heat insulation test
e) Sample preparation for slip resistance test for full shoe
|
| 6. |
Safety footwear as per ISO 20344
Whole footwear, slip resistance, CoF, pH value (for leather only), Flexing resistance (Bennerwart), Abrasion resistance (insock)
|
| 7. |
Leather Goods
a) Classification of Leather goods and fancy leather goods.
b) Tear strength of leather, Strength at needle perforations, Handle attachment strength, Martindale abrasion test
c) Colour fastness to water spotting, Water fastness test for components, Adhesion finish test
d) Sample preparation for peel strength and Shear strength of Tough & close material, Corrosion resistance for metallic eyelets, trims and buckles.
|
| 8. |
Leather Garments
a)Introduction for leather garments and performance testing, Tear strength of lining materials, Colour fastness to water spotting, Water proofing test, Ageing test for leather garments
|
| 9. |
Visual Inspection leather and leather goods
a) Classification of quality defects, Key Areas of Quality Control Inspection for leather goods, Key Areas of Quality Control Inspection for garments.
|
| 10. |
Business Communication
a) Behavior in interpersonal relationship, Conflict management
|
| 11. |
Develop entrepreneurship skills
a) Importance of entrepreneurship
b) Strategy and entrepreneurship
c) Managing global leather markets
d) Market Forecast
|